Your current browser is outdated. This website uses state-of-the-art web technologies. Therefore, it should only be used with the most recent browser versions. In order to get the best possible result and to ensure security, we recommend you to use the most recent version of the following browsers:
High feed milling with larger depths of cut.
High efficiency modular drill. Excellent chip evacuation with 6D maximum deep-hole drilling.
Excellent hole accuracy with a low cutting force design
For stable and efficient drilling • MEGACOAT carbide grades: PR1230 for steel, PR1225 for stainless steel and PR1210 for cast iron. • Ø 12-60mm
Stable machining with greater chatter resistance
Stable machining with greater chatter resistance
High reliability at high speed machining of aluminum
Reduced chattering with low cutting force design
Economical double-sided 6-edge insert and superior fracture resistance due to thick edge design.
Excellent performance and durability in a smaller, economical size
Low cutting force, reduced chattering and high efficiency machining
High performance, multi-functional milling cutters
Low cutting force minimizes burr and chipping for high quality machining
Excellent chip control and long tool life with high pressure coolant
Excellent surface finish and long tool life
Next generation CVD coating for longer tool life
CVD coated carbide for highly stable cast iron machining
Long tool life and stable machining of steel
CVD and PVD coated carbide for stainless steel
High quality and tool life for aluminum machining
Improved grooving performance
High-quality surface finish and high-efficiency machining
Unique design for superior performance in cut-off operations
25° Insert tip with greater maneuverability shortens machining processes and reduces costs.
Indexable insert flat drill
DLC Coated End Mills for Non-ferrous Materials.
Thread milling is a proven process that is used as an alternative to thread cutting and thread forming. In our brochure, you can discover the thread milling technology with which you can manufacture much more economically than before.
Ball nose end mills for high-end finishing with a focus on highly accurate surfaces and dimensional accuracy. The new "DUROREY" coating virtually eliminates flaking. This makes the tools ideal for materials above 60HRC and enables long tool life.
Highly efficient deep hole drilling up to 50xD is made possible by the new "R-Gash" pointing, which breaks the chips briefly so that they can be easily removed. The new flute shape and the adapted spiral angle also contribute to increasing the stability of the tools and the hole quality.
ADO-MICRO`s unique cooling bore and flute geometry enables a stable process even when used with the smallest diameters. Drilling without airing is possible even with deep holes and enables a more efficient process.
Solid carbide milling cutter with top price-performance ratio.
2-fluted carbide drills have their limits when it comes to halving production costs while doubling efficiency. The TRS is the world's first 3-fluted drill for steels. The patented geometry enables stable chip transport, even with less chip space, which is common with 3-fluted drills. The result is up to 3x faster than 2-fluted drills and up to 3x longer tool life.
AE-VMS is ideally suited for milling stainless steel, carbon steel and alloy steel. The new flute shape with its excellent chip removal enables process-reliable milling with low burr formation.
New carbide drill series.
Carbide flat drills with and without internal cooling.
The solution to thread problems.
High performance tap.
The HY-PRO® CARB range of solid carbide drills is an ideal blend of performance and cost efficiency.
Core drill for common thread sizes with chamfer. Extensive special sizes available in a short time on request.
The SynchroMaster tapping chuck is designed to supercharge tapping performance on CNC machines with synchronous spindles by compensating for synchronisation errors during tapping.
Deep hole drilling up to 50xD as standard including technical information and drilling strategies.
Centring / chamfering tools
Endmills for milling built-up of welding parts
Phoenix cutter series
Multifunctional tool- for plunging and horizontal milling in one tool!
Designed for a wide range of materials. Cutting edge geometry with excellent sharpness and high chip resistance.
Maximise the full potential of high performance machines! Ideal for highly efficient machining of large aluminium aircraft components.
The secret of 1-pass cutting. Evolution from conventional 2-pass cutting to 1-pass cutting by avoiding bending, reducing cutting time.
Ceramic milling cutter series for machining highly heat-resistant materials with very high cutting speeds.
Straight fluted solid carbide reamers. Solid carbide/ solid carbide for toughness & high wear resistance. For high-precision processing due to diameter tolerance from 0 to 0.005 mm.
Diameter measuring device / internal thread from OSG: DCT. The difficult to determine effective diameter of the internal thread can now be measured with readable values in one tool!
Powder metal tap for steels 25~45 HRC
Indexable inserts series for boring, for flat countersinking and for chamfering! The series comprises a total of 68 holders and 20 different inserts.
The PD series has a unique flute design with integrated chipbreaker and a very smooth surface for process-safe chip formation and removal. The insert drill has identical inserts on the inner and outer insert seat, which prevents insert mix-up.
Finishing Cutter for Aluminum
New Phoenix anti-chatter cutters
The PSTW is a 6 flute corner cutter series designed for high efficiency roughing. Designed to effectively machine long overhang applications with low vibration tendency due to high rigidity and positive rake angle geometry.
PHOENIX PXD is an interchangeable head drill series designed for efficient and precise machining. Ideal for 3XD and 5XD drilling in carbon and alloy steel, cast iron and non-ferrous materials.
Universal thread cutting in steels and stainless steels.
Extra long HSS drill bits (without IKZ) with the new WD1 coating from OSG. Drilling up to 20xD without chucking.
4 and 5 flute solid carbide end mill for highly efficient machining of titanium alloys. Vibration reduction due to unique flute design.
Our VP(O)-DC-MT taps are the industry leading tap for machining threads in cast iron, ductile iron and cast aluminium. The combination of ultra-strong rake with our VC10 sintered metal makes this tap the absolute best solution for tapping ductile castings.
Thread milling into the solid (without pre-drilling).
Wide variety of solid carbide cutters with WXL & WXS coating.
Solid carbide cutters with WXS coating. For high-speed machining of hardened steels.
PHX-LN-DBT / PHX-LN-CRE
With the PXM series, OSG combines the advantages of solid carbide and indexable insert tools.
Suitable for Super Duplex stainless steel
Cylindrical milling cutters and ball milling cutters for high-end finishing with a focus on high-precision surfaces and dimensional accuracy. The new "DUROREY" coating virtually eliminates flaking. This makes the tools ideal for materials above 60HRC and enables long tool life.
Fast and accurate tool assembly with any wrench.
The new REGO-FIX measurement technology product line.
Defining precision in a new dimension.
Parallel floating for perfect holes
Total system TIR ≤3 μm at 3 x D Best results at highest RPM The creator of ER re-invents the collet system
for ER and MR clamping nuts
Reduction of set-up time through powRgrip ® and the EWS Varia VX quick change system
The MTSK quick change system with powRgrip® for performance and precision.
Tools with small diameters for the watch industry.
Modular clamping technology and automation
The complete Kyocera Micro Tools catalogue.
Solid carbide milling tools from M.A. Ford and OSG.
Thread milling cutter made of solid carbide with interchangeable inserts from mimatic.
Everything about tapping and forming from OSG.
Drills, twist drills, centre drills and reamers from OSG.
Tool holders and boring tools from Swisstool.
All tools for countersinking, countersinking, drilling, boring, deburring, edge milling from our own brand vb-tools.
Complete workpiece clamping technology vb-DockLock zero point clamping system - Automation - Manual production - Special solutions and pressure units Clamping devices and clamping systems - Support bodies and clamping elements - Vise systems and accessories - Centring clamps with accessories - K-5000 modular clamping system
6C Tools offers a wide range of standardised drilling, milling and threading tools made of solid polycrystalline diamond (PCD). In addition to standard tools, 6C Tools specialises in the development, manufacture and optimisation of special tools for customer-specific applications. Together with our experts, optimal manufacturing solutions can thus be developed and offered.
High Efficiency Milling in Aluminium
The PlusLine SynchroFit tapping chuck has a new type of wear-free cutting pressure compensation. This acts like a shock absorber that absorbs the enormous axial compressive and tensile forces. This relieves the thread flanks and ensures maximum tool life.
The tooling system with powRgrip® for driven tools with ISO 26623 compatible interface.
The advantages of powRgrip® in grinding applications have been proven many times over in applications with HSK interfaces. The HJNZ holders, developed in close cooperation with grinding machine manufacturers, offer extensive advantages over the widely used ER and mandrel solutions.
powRgrip® system You receive either a PGU, PGC clamping unit or already clamped tools. The Test & Trial package also includes up to 5 tool holders and 10 collets. reCool® coolant supply system Quickly and easily retrofit from external to internal cooling. The reCool set will be sent to you as soon as you have contacted your personal application engineer and we know for which application you want to use it.
The quick change system with powRgrip® for performance and precision.
The easy-to-use, solvent-free, mechanical cleaning solution for all your taper interfaces. Get best precision thanks to cleanliness.
Peripheral cooling for demanding applications with the new PG-CB collets – complementary to the established Standard and PG-CF CoolFlush variations.
Ultimate protection thanks to high quality martensitic stainless steel 1.4122 (X39CrMo17-1). Get all the advantages of an ER collet combined with corrosion protection – Made in Switzerland.
PG-CRYO collets offer the latest tool cooling technology, for a clean chipping of workpieces (i.e. Medical industries).
Upgrade your lathe to internal cooling with the smallest interference contour.
The new reCool® Hi-Speed: Upgrade your spindle to coolant through for high speed.
The extended line of powRgrip® clamping units to fit any demands.
Performance and precision adapted to any application – within seconds.
Hydraulic zero point clamping system Positive clamping with collet chuck for highest pull-in forces, Absolutely low-wear,as only 3 moving parts. With diagonal pull handling and push-off function.
Pneumatic zero-point clamping system
• Excellent accessibility • High holding power • Various mounting possibilities as standard • Swivel jaw ± 2° for raw parts • Jaw width 76 mm, clamping range up to 214 mm Also with swivel jaw or center saddle
LED lights for larger machine rooms
The complete KYOCERA cutting tools catalogue.
We hereby present the complete programme of our stocked diamond tools. By concentrating on the diamond cutting materials PCD and CVD-D, we demonstrate our concentrated competence in the use of the most modern cutting materials and the formation of perfect cutting edges in combination with lasered chip breakers.
Swiss Precision Cutting Tools catalogue.
The 2020 Product Catalogue from M.A. Ford.
The large machining tools catalogue from mimatic.
With almost 1,000 pages, OSG's tool range has been impressively expanded in the brand new Catalogue VI. Browse through the Tapping, Drilling & Milling section to discover dTop quality shank and insert tools.
powRgrip® System | ER System | micRun® System | Multi Line System | Accessories | Technical information
Top performance at attractive prices, thanks to quantity discount and net prices.
Top performance at attractive prices.
Solid carbide millings for hardened steels (45-70HRC). Exceptional performance in hardened steels due to novel coating results in high toughness, heat resistance and wear resistance. Reduces the risk of coating chipping even when milling high hardness, resulting in very long tool life.
A new standard in the field of end milling. The new flute shape with its excellent chip removal enables process-reliable milling with low burr formation. Main area of application in all types of steel, from simple structural steel to complex stainless steel.
The HY-PRO® CARB series for solid carbide drills is an ideal mix of performance and cost efficiency. Now also available with Weldon clamping surface!