END MILL 1610

END MILL 1610

14 Results

micro end mill 1610L 0.45mm Manufacturer: Kyocera, cutting material: SC, cutting edge diameter [mm]: 0.45, Usable length [mm]: 1.35, Cutting edge length [mm]: 1.35

CHF 42.60
micro end mill 1610L 0.15mm Standard length, AlTiN coated) Manufacturer: Kyocera, cutting material: SC, cutting edge diameter [mm]: 0.15, Usable length [mm]: 0.45, Cutting edge length [mm]: 0.45

CHF 56.50
micro end mill 1610L 0.20mm Standard length, AlTiN coated) Manufacturer: Kyocera, cutting material: SC, cutting edge diameter [mm]: 0.2, Usable length [mm]: 0.6, Cutting edge length [mm]: 0.6

CHF 52.10
micro end mill 1610 1.50mm non coated Manufacturer: Kyocera, cutting material: SC, cutting edge diameter [mm]: 1.5, Usable length [mm]: 4.5, Cutting edge length [mm]: 4.5

CHF 25.10
micro end mill 1610 0.10mm non coated Manufacturer: Kyocera, cutting material: SC, cutting edge diameter [mm]: 0.1, Usable length [mm]: 0.3, Cutting edge length [mm]: 0.3

CHF 36.00
micro end mill 1610 0.15mm non coated Manufacturer: Kyocera, cutting material: SC, cutting edge diameter [mm]: 0.15, Usable length [mm]: 0.45, Cutting edge length [mm]: 0.45

CHF 50.90
micro end mill 1610 0.25mm non coated Manufacturer: Kyocera, cutting material: SC, cutting edge diameter [mm]: 0.25, Usable length [mm]: 0.75, Cutting edge length [mm]: 0.75

CHF 27.20
micro end mill 1610 0.35mm non coated Manufacturer: Kyocera, cutting material: SC, cutting edge diameter [mm]: 0.35, Usable length [mm]: 1.05, Cutting edge length [mm]: 1.05

CHF 37.10
micro end mill 1610 0.40mm non coated Manufacturer: Kyocera, cutting material: SC, cutting edge diameter [mm]: 0.4, Usable length [mm]: 1.2, Cutting edge length [mm]: 1.2

CHF 25.80
micro end mill 1610 0.45mm non coated Manufacturer: Kyocera, cutting material: SC, cutting edge diameter [mm]: 0.45, Usable length [mm]: 1.35, Cutting edge length [mm]: 1.35

CHF 37.10
micro end mill 1610L 0.10mm Standard length, AlTiN coated) Manufacturer: Kyocera, cutting material: SC, cutting edge diameter [mm]: 0.1, Usable length [mm]: 0.3, Cutting edge length [mm]: 0.3

CHF 54.30
micro end mill 1610L 0.25mm Standard length, AlTiN coated) Manufacturer: Kyocera, cutting material: SC, cutting edge diameter [mm]: 0.25, Usable length [mm]: 0.75, Cutting edge length [mm]: 0.75

CHF 42.30
micro end mill 1610 0.60mm non coated Manufacturer: Kyocera, cutting material: SC, cutting edge diameter [mm]: 0.6, Usable length [mm]: 1.8, Cutting edge length [mm]: 1.8

CHF 37.10
micro end mill 1610L 0.80mm Standard length, AlTiN coated) Manufacturer: Kyocera, cutting material: SC, cutting edge diameter [mm]: 0.8, Usable length [mm]: 2.4, Cutting edge length [mm]: 2.4

CHF 36.00

Our top categories