OSG thread milling cutter with central cooling holes

AT-2 R-SPEC 2.5xD M

for use without pre-drilling
DLC-IGUSS coating

7 Results

Thread milling cutter AT-2 R-SPEC M3x7.5mm for use without pre-drilling, DLC-IGUSS coating Manufacturer: OSG, cutting material: SC, cutting edge diameter [mm]: 2.4, Usable length [mm]: 7.5, Thread type: M, Thread pitch [mm]: 0.5

CHF 112.00
Thread milling cutter AT-2 R-SPEC M4x10mm for use without pre-drilling, DLC-IGUSS coating Manufacturer: OSG, cutting material: SC, cutting edge diameter [mm]: 3.1, Usable length [mm]: 10, Thread type: M, Thread pitch [mm]: 0.7

CHF 114.00
Thread milling cutter AT-2 R-SPEC M5x12.5mm for use without pre-drilling, DLC-IGUSS coating Manufacturer: OSG, cutting material: SC, cutting edge diameter [mm]: 4, Usable length [mm]: 12.5, Thread type: M, Thread pitch [mm]: 0.8

CHF 115.00
Thread milling cutter AT-2 R-SPEC M6x15mm for use without pre-drilling, DLC-IGUSS coating Manufacturer: OSG, cutting material: SC, cutting edge diameter [mm]: 4.6, Usable length [mm]: 15, Thread type: M, Thread pitch [mm]: 1

CHF 117.00
Thread milling cutter AT-2 R-SPEC M8x20mm for use without pre-drilling, DLC-IGUSS coating Manufacturer: OSG, cutting material: SC, cutting edge diameter [mm]: 6.2, Usable length [mm]: 20, Thread type: M, Thread pitch [mm]: 1.25

CHF 124.00
Thread milling cutter AT-2 R-SPEC M10x25mm for use without pre-drilling, DLC-IGUSS coating Manufacturer: OSG, cutting material: SC, cutting edge diameter [mm]: 7.5, Usable length [mm]: 25, Thread type: M, Thread pitch [mm]: 1.5

CHF 125.00
Thread milling cutter AT-2 R-SPEC M12x30mm for use without pre-drilling, DLC-IGUSS coating Manufacturer: OSG, cutting material: SC, cutting edge diameter [mm]: 9, Usable length [mm]: 30, Thread type: M, Thread pitch [mm]: 1.75

CHF 130.00

Our top categories

AT-2 R-SPEC 2.5xD M

Please select your article

Produkte

Main Menu

Account

Other